500T Hydraulic Cold Woodworking Press Machine Small Installed Power

 500T Woodworking Wood Hydraulic Cold Press Machine

Brief introduction

plywood cold machine is hich is the machinery and equipment of initial sticking before gluing in order to shortening hot pressing cycle and improving workpiece quality. It belongs to pressure machinery. It mainly cold and mold in a short time single board of glued and formed and to make it initial shape. Then put into the hot press machine for hot pressing and sticking. It is important to improve plywood quality.

Main feature:

1.) This machine is a combination of individual components with small volume, it can be carried and assembled easily.

2.) Main components of hydraulic device installed on the top of mainframe, less occupied area, the outlet oil pipe is already assembled before leaving factory.

3.) shallow foundation, less than 1.5m at the deepest, easy to clean and maintain, good security and lower cost.

4.) small installed power, fast closing speed.

5) smooth movements,small strouble.

Advantage

1.) This machine is a combination of individual components with small volume, it can be carried and assembled easily.

2.) Main components of hydraulic device installed on the top of mainframe, less occupied area, the outlet oil pipe is already assembled before leaving factory.

3.) shallow foundation, less than 1.5m at the deepest, easy to clean and maintain, good security and lower cost.

4.) small installed power, fast closing speed.

5) smooth movements,small strouble.