|Applicaition:||PVC, ABS, MDF, Solid, Shaving Board, Melamine||Panel Thickness:||10-60mm|
|Working Pressure:||0.6Mpa||End Cutting Motor:||0.37KW * 2 200HZ 12000RPM|
wood edge banding machines,
edge banding trimming machine
SYS-468 Automatic Edge Bander with Trimming for Panel Furniture and PVC
1. Through special structure, the edge-sealing sheet and the edge-sealing material are evenly coated and pressed, so that the edge-sealing strip is more firmly attached.
2. Through the precision linear guide motion, the rapid cutting structure of the high-frequency high-speed motor is automatically tracked by the master to ensure that the cut surface is smooth and smooth.
3, using the model automatic tracking and high-frequency high-speed motor structure, repair the excess edge banding material on the edge of the board edge strip.
4. used to eliminate the ripples caused by the cutting process of trimming non-linear motion.
5. Clean the finished plate with a cotton polishing wheel and smooth the edge of the edge by polishing.
This edge banding machine is suitable for PVC, ABS, MDF, Solid, shaving board, Melamine, Batten, Veneer ,plywood and particle board etc.
|Edge Band Thickness||0.4-3mm|
|Gluing Motor||0.75KW 50HZ 1400RPM|
|End Cutting Motor||0.37KW * 2 200HZ 12000RPM|
|Trimming Motor||0.75KW * 4 300HZ 18000RPM|
|Track Trimming Motor||0.37KW*2|
|Buffing Motor||0.37KW * 2 50HZ 1400RPM|
|Glue Pot Heating Power||1.85KW|
|Assistant Heating Power||0.45KW|
Contact Person: Lisa Mou